Encapsulation of costly stainless steel parts not only expands the life of the probe but increases its potential use in any corrosive environment.

Our Probe Covers are designed to slip over standard size probes and shrink when exposed to a heat source of approximately 300ºF. Specific shrinking instructions are available upon request. A typical probe encapsulation should take no more than two to three minutes.

Thermocouples, Probes, RTD's and a variety of sensors all benefit from the protection offered by Fluoropolymer Probe Covers. Tef-Cap has extensive knowledge and equipment plus testing facilities to ensure that your probe is properly encapsulated and protected.

If you are not comfortable with shrinking Tef-Cap Probe Covers on your instruments why not have Tef-Cap do the encapsulation service for you. All probes can be encapsulated and returned on an expedited basis - generally no more than one or two days are required.

Delicate instruments such as glass thermometers and glass thermo-wells also benefit from encapsulation. With complete encapsulation there is no more worry about mercury or glass contamination.

Click Here to download Printable Brochure.

• Lengths: 6 inches to 150 inches
  
• Probe Covers Are Available In: FEP (clear) & PFA (black)
  
• Standard Probe Cover Sizes (inches): 1/16, 1/8, 3/16, 1/4, 3/8
  
• Custom Lengths, Diameters And Wall Thickness Available.