|
|
 |
|
|
Tef-Cap's Convoluted Tubing is engineered to be an equivalent to that
of Corrugated Tubing where sharp turns and small band diameters are
needed. It can be used as an electrical or fluid conduit in the semi
conductor industry.
Convoluted Tubing
will operate in applications where high temperatures are required
and other materials are not suitable. Both TFE and FEP are FDA approved
materials and can be used in food and medical industry.
FEP and PFA are high temperature materials that have a non-stick
surface, allowing easy cleaning. Both FEP and PFA are excellent
electrical insulators and resist most corrosive liquids including
hot acids. TFE has the best flex-life and can be post formed easier
than FEP or PFA
|
- Convoluted
Tubing can be reinforced with stainless steel wire on the O.D.
for operations at higher pressures.
- Conductive
TFE Convoluted Tubing is also available.
- Recommended
for higher temperature and pressure applications.
- Standard
sizes are (inches) : 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1 ¼,
1 ½, 2
|
|
|
|
Tef-Cap's Corrugated tubing is engineered to be a flexible FEP
or PFA tubing that can turn sharp corners and be shaped with
very small bend diameters without reducing the inside diameter.
It can be used as an electrical or fluid conduit for robots
equipped with flexible arms that contain electrical wiring,
air, or corrosive liquids.
Corrugated tubing will operate in applications where high temperatures
are required and other materials are not suitable. Corrugated
tubing can be reinforced with Kevlar braid, or other textile
braids for operations at higher pressures.
|
|
FEP
and PFA are high temperature materials that have a non-stick surface,
allowing easy cleaning. Both FEP and PFA are excellent electrical
insulators and resist most strong corrosive liquids including hot
acids. Tef-Cap's Corrugated tubing is manufactured from virgin PFA
/ FEP and is non-contaminating. Corrugated tubing can also be manufactured
from high purity PFA.
- Recommended
for low temperature and low pressure applications.
- Bend Diameter
: 1/2 of Tubing Inside Diameter.
- Extension
- Compression Length Ratio : Approximately 2:1
- Standard
sizes are (inches) : 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1 ¼,
1 ½, 2
|
|
|
|
|
|
Coiled FEP Fluoropolymer tubing is often used to increase
surface area and exposure time in "UV " purification
systems. 
Applications:
- DI
Water Dispensers
- DI
Recirculators
- Heat
Exchangers
- Laboratory
- Pure
Chemical Dispensers
- Where
corrosive chemicals are used in plating
|
|
|
|
